The T5 integrated lamp has been mounted on the bracket and is easy to install. This is the more common way T5 is now (mainly T5 is too small). The split separates the bracket from the tube. There are two types. One is that the lamp driver is already installed in the lamp. Brackets can be relatively common, that is, the tubes and drivers can be purchased separately. It is the same as a traditional fluorescent lamp (since the diameter of the T5 is relatively small, many of them use a resistance and voltage reduction to conduct a constant current, the rating is very low), and the other is the driver mounted on the bracket, ie the bracket and The lights must be used together. This means you can only buy the same brackets and tubes.
There are currently T5 lamps, T5 integrated and T5 split tubes on the market.
The T5 integrated assembly is similar to the T8 tube and the power supply is built into the aluminum interior because the integrated aluminum space is large enough.
T5 open tube with linear solution that drives the SMT board,
There are T6 to T5 tubes, T8 to T5 tubes, but these are not real T5 tubes.
The standard T5 tube has a diameter of 16 mm. Due to the realization of the switch cross-flow drive, the power supply design has certain difficulty.
This standard T5 lamp supports T5 fluorescent lamps with AC100-277V power supply. The components are made of glass tube technology, the light board is fixed by glue, and the glass tube is built with constant current driving power.
--Shenzhen Toplight lighting Co. Ltd.(led tube light/LED linear light
/led high bay light/led tri-proof light/Toplight/Toplight Lighting)